Freefly Movi Hoodie Accessory Mount

Mounting a small accessory on your Movi is easy with the Movi Hoodie Accessory Mount. Installation is simple! Mount your accessory to the Hoodie with one of the included screws (Attaching accessories to mount requires a 1/8″ hex driver (not included)). Slip the mount onto the top of the Movi grip and secure in place with the o-ring. If you mounted a mic that plugs into your phone, install the included cable guide onto the arm of the Movi (Installing the cable guide requires a 2.0mm hex driver (not included)), to help route the cable so it doesn’t interfere with your movements.

• Freefly Movi Hoodie Accessory Mount – Cable Guide – M3x8 Flat-Head Cap Screw (FHCS) – 2x (1/4-20 x 3/8) Low Profile Socket Head Cap Screw (SHCS) – 2x O-Ring – Freefly Warranty
• Lightweight design
• 1/4″ 20 mounting screws are compatible with many small camera accessories (shotgun mic, light, etc.) (Some accessories (like Rode mics) use a 3/8″ 16 thread and will require a reducer bushing to mount on the Movi Hoodie)
• Quick installation